Bertha Blecher. chimney ideas. April 19th , 2018.
Buy a pulley rope system to be used with your chimney brush. Two ropes are attached to the brush, one on the top and one on the bottom, and the brush is operated from both the roof and the fireplace. Assemble the pulley system with the brush. Have one person take it up a ladder to the roof. The person on the roof should hold one side of the rope, and drop the other side, with the brush in the middle, through the flue to the other person waiting below.
Determine the size and shape of the flue. It will be either square or round, 6 inch or 8.
If you are using the rope and weight method, attach the weighted rope to the brush. Hold the end of the rope and lower the brush into the chimney. Lift it up and down in a scrubbing motion along the entire length of the flue.
Measure your chimney flue. To clean your chimney, you will have to use properly sized tools. Measure the sides of your chimney from the bottom, through the fireplace. You could also climb up a ladder and measure it from the top.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does gegottalent claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.