chimney ideas. Tuesday , April 03rd , 2018 - 06:27:13 AM
Buy a pulley rope system to be used with your chimney brush. Two ropes are attached to the brush, one on the top and one on the bottom, and the brush is operated from both the roof and the fireplace. Assemble the pulley system with the brush. Have one person take it up a ladder to the roof. The person on the roof should hold one side of the rope, and drop the other side, with the brush in the middle, through the flue to the other person waiting below.
Dissemble the brush and extensions, or detach the rope. Place the supplies in your satchel and climb back down the ladder. Clean the bottom of the chimney. Use the small wire brush to clean the bottom of the flue that you may have missed with the brush. Clean the chimney from the bottom up.
If you are using the rope and weight method, attach the weighted rope to the brush. Hold the end of the rope and lower the brush into the chimney. Lift it up and down in a scrubbing motion along the entire length of the flue.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does gegottalent claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.