chimney ideas. Friday , April 13th , 2018 - 21:16:14 PM
Determine the size and shape of the flue. It will be either square or round, 6 inch or 8.
Chimneys come in all shapes and sizes brick, stone, metal, or from a pipe to a wide opening and more. Some people use a chimney for a gas fireplace or a wood fireplace, some for a wood burning stove. All of them need the same things though, access to oxygen, protection from excessive elements like rain and wind, and a way to keep unwanted visitors out. All three of these needs can be met by having a cap, but choosing the right cap has everything to do with the type of chimney you have. To figure this out, climb up onto your roof, count the number of flues, often a square of stone or one or two metal pipes, and write down a good description of each. Do pipes stick up out of the base? How far? etc, and measure each with your handy tape measure. Or, if you are not feeling so daredevilish, ask your chimney sweep or other professional chimney service to come by and take a look for you.
Buy a pulley rope system to be used with your chimney brush. Two ropes are attached to the brush, one on the top and one on the bottom, and the brush is operated from both the roof and the fireplace. Assemble the pulley system with the brush. Have one person take it up a ladder to the roof. The person on the roof should hold one side of the rope, and drop the other side, with the brush in the middle, through the flue to the other person waiting below.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does gegottalent claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.